DIRECTION OF IMPROVEMENT OF THE WORKING BODIES OF HAMMER

Ескіз недоступний
Дата
2020
Назва журналу
Номер ISSN
Назва тому
Видавець
Анотація
Among the many types of grinding machines used in enterprises of grain processing, food and other industries, an important place belongs to hammer crushers. This is explained by the possibility of their use for grinding materials of various origins (plant, animal, mineral, as well as various wastes of food production), various particle size distribution (lumpy, briquetted, granular, fibrous), having different strength properties (hard, medium hard, soft, brittle, viscous), capable of being crushed once or requiring double sequential crushing. In addition, hammer crushers are characterized by relative simplicity of design, and most importantly - they destroy materials in the most rational way - by impact loading as a result of two successive strokes: a hammer on a particle and particles on the surface of the deck. The execution of these attacks at right angles creates the conditions for the intensification of the destruction process. However, the wear of the hammers leads to a rounding of their impact faces, which makes the angles of attack in the active zone of the hammers significantly different from the direct one. Under the influence of shock-frictional loads, their working surfaces quickly wear out, which leads to a decrease in productivity and crushing efficiency, to an increase in energy consumption, a disturbance in the balance of hammer rotors, an increase in the vibroacoustic activity of crushers, and other negative consequences The invention of the “Hammer of the crusher” provides for the use of ring-shaped multi-toothed hammers, the durability of which, when using traditional materials and conventional heat treatment, is increased by 4...5 times, eliminates the need for periodic rearrangement of hammers, stabilizes the operation of crushers. The possibility of self-sharpening ring-shaped multi-toothed hammers after reversing the hammer rotor simplifies the maintenance of crushers, eliminates personnel errors when replacing worn hammers. If multi-toothed hammers are subjected to liquid non-electrolysis boration and heat treatment using an optical quantum generator, then their durability can increase by more than ten times.
Опис
Ключові слова
Бібліографічний опис
Зібрання