PROBLEM TOPICALITY OF OFFSET ABSENCE ORDER INCREASE IN CONTROLLERS DURING CONTROL OF OBJECTS WITH VARYING TRANSMISSION COEFFICIENT
Ескіз недоступний
Дата
2016
Назва журналу
Номер ISSN
Назва тому
Видавець
Анотація
Non-stationary control objects, especially with varying transmission coefficient, are fairly common in practice. Creation of automatic control systems (ACS) for them is topical issue. This task of creating ACS for these kind of control objects is more difficult than for stationary control objects (with constant parameters) because process value deviations relative to set point value are caused not only by coordinate disturbances but also by parametric ones. The issue of offset absence order increase impact on the levels of stabilization and reference tracking errors traditionally is dealt with when making synthesis of stationary ACS, particularly follow-up and program systems. For analytical solution of the non-stationary ACS analysis and synthesis problems, which contain control objects with varying transmission coefficient ko(t), it is necessary to utilize mathematical methods of linear systems with varying parameters. They are based on the concept of parametric transfer function. At the same time analytical calculation of stabilization and reference tracking errors, even for steady processes, is, apparently, extremely difficult, because there were found no examples of solution to this problem in technical publications. Computer modeling is considered more productive. It does not allow to obtain analytical expressions for control errors. But computer experiment goal planning allows to mark out their basic features and to evaluate effective methods of decreasing these mistakes.