Переглянути
Нові надходження
Зараз показуємо 1 - 5 з 14
- ДокументFOOD MARKETS AND FOOD SECURITY: SCIENTIFIC BASIS OF FORMATION(2018) N. Kordzaia, B. YegorovToday, the publicity and the scientific community, businessmen and officials pay much attention to the food security problem. However, despite this, it is not solved. This problem has even become global. An analysis of the existing approaches to the definition of “food security” is given in the article. A more systematic and comprehensive definition of this term is formulated on the basis of this study. Moreover, the legislation of the world’s countries, in particular Ukrainian legislation, aimed at solving the food security problem are investigated. A food market forming mechanism is first proposed in the work. It depends on the impact of international politics and political conditions in the country, as well as on the state structure and level of state regulation. This mechanism includes three main interrelated elements: the organizational and economic food production mechanism, the degree of technological development, and the population`s lifestyle. Also a model is developed for the formation of food security through the formation of food markets.
- ДокументCOLOR CHARACTERISTICS OF DRIED THREE-COMPONENT FRUIT AND BERRY PASTES(2018) O. Cherevko, V. Mykhaylov, A. Zahorulko, A. Zahorulko, A. BorysovaColor characteristics of compositions of three-component fruit and berry pastes before and after infrared drying are determined. The compositions were prepared on the basis of apples, cranberries, and hawthorn with increased nutrition value and therapeutic and prophylactic properties, according to the suggested recipe. The ratio of the components in the first composition is 60 : 30 : 10, in the second, 65 : 25 : 10, and in the third, 55 : 40 : 5. The resulting compositions were controlled by the control (apple paste). To dry the compositions obtained, it is proposed to use a roller IR dryer based on a flexible resistive film electric heater of emitting type. The prepared paste compositions are reddish-orange according to the color characteristics determined. Color characteristics of dried three-component fruit and berry pastes are also determined. The wavelength of composition 1 is 498 nm, and those of compositions 2 and 3 are 620.5 and 589.4 nm, respectively. The first composition is bluish-purple, with tone purity 34.7 %. Composition 2 is red (34.8 %), composition 3 is bluish-red (34.6 %). The comparison of the color characteristics of compositions of three-component fruit and berry pastes before and after infrared drying as for the brightness and tone purity of the samples indicates a slight change in brightness within 2—6 %. Reduction of the color purity to almost a half is due to the drying shrinkage of the mass of raw materials and obtaining a visual color of the compositions that is attractive for a consumer. According to the results of expert evaluation of the quality indices of dried three-component fruit and berry paste compositions, a certain advantage is determined of the dried composition with the following ratio of components in the recipe: apple, cranberry, hawthorn — 60 : 30 : 10 (composition 1). The suggested compositions of dried three-component fruit and berry paste are recommended for use in food rations as an independent product, as well as for manufacturing flour products, soft drinks and spirits, confectionery and bakery products.
- ДокументBASIC INGREDIENTS AND THEIR ANALYSIS DURING THE FORMATION OF BEER QUALITY(2018) N. Penkina, L. Tatar, А. Оdаrchеnco, V. DemchenkoThe analysis and comparative description are carried out of varieties of brewing barley light malt and type 90 hops from domestic and foreign producers, as the main plant raw material that forms the quality of beer. The quality indexes of malt samples and hop pellets have been tested for compliance with applicable standards.The obtained results indicate that the varieties of barley malt are homogeneous grain mass, do not contain moldy and damaged grains, weed impurities, have a color from light yellow to gray to yellow. Ten samples of malt of various grades for beer production have been studied in terms of mass fraction of moisture (3.2–3.7%), mass fraction of extract in dry matter of fine malt (82.4–87.5%), degree (0 9–1.2%), the mass fraction of protein substances in dry matter of malt (9.1–10.1%), the Kolbach index (39.1–40.2%), the amount of nitrogenous substances (0.70–0, 74%). It has been established that the quantitative content of β-glucans significantly differs in different varieties: the minimum amount is contained in the malt Château Wien, the maximum is Pilsner Weyermann and Munich.According to the research results, it has been established that barley malt varieties have a pronounced malt aroma and sufficient fermentative activity and can serve as the base in the mash in the production of beer. It is proved that malt samples have an acceptable amount of toxic substances and radionuclides that will not affect the quality of the finished product. In assessing the quality of varieties of hop pellets by organoleptic indicators, the mass fraction of moisture and α-acids, it is established that the samples have the values of the indicators within the permissible limits. The samples have a cylindrical shape of different hues and approximately the same size; pure hop aroma, without an off-aroma; the color on the surface and at the boundary of the pellets meets the requirements of the standard. The mass fraction of α-acids is in the range from 3.0 to 12.7 %. It is revealed that bitter and aromatic hops are used for pellet production. The samples Magnym and Hallertau Perle are classified as bitter varieties. Hop pellets of the varieties Premiant and Sladek are bitter and aromatic.According to the results of the determination of quality indicators, the following ones have been identified as the best: malt – Munich, Pilsner, Carabohemian, hop pellets – Bramling Cross, Mandarina Bavaria and Magnym. The proposed varieties of malt and hops allow obtaining beer with high organoleptic characteristics, colloidal stability and expand the range of the industry by creating new varieties to meet the needs of the consumer.
- ДокументSTARTER CULTURES COMPOSITIONS WITH PROBIOTICS FOR FERMENTED MILK PRODUCTS AND COSMETICS(2018) N. Tkachenko, Ju. V. Nazarenko, N. Dets, E. Izbash, I. KlymentievaThe expediency of optimization of starter cultures composition of mixed cultures Lactococcus sp. and mixed cultures Bifidobacterium bifidum BB 01 + Bifidobacterium longum BL 01 + Bifidobacterium breve BR 01 for the manufacture of fermented milk products and cosmetics for teenagers and people under the age of 40-45 years with probiotics has been substantiated.The value of titratable acidity, number of viable cells of bifidobacteria has been determined, as well as the most probable number of lactobacterium in fermented probiotic clots obtained with different ratios of mixed cultures Lactococcus sp. and mixed cultures of Bifidobacterium sp. in starter cultures compositions (the initial concentration of the mixed cultures (MC) Lactococcus sp. and MC Bifidobacterium sp. varied within the range of 1×105 – 1×106 CFU/cm3 of the inoculated milk, enriched with fructose as a growth factor of bifidobacteria). The high content of probiotics and the lowest values of titratable acidity are typical of the fermented milk clots obtained using starter cultures composition with a ratio of MC Lactococcus sp. : MC Bifidobacterium sp. 1 : 10. The maximum number of lactococci viable cells is observed in clots obtained using starter cultures composition with the initial ratio of MC Lactococcus sp. : MC Bifidobacterium sp. 10 : 1. The optimum ratio of MC Lactococcus sp. and MC Bifidobacterium sp. – 1 : 10 has been established (initial concentration of the cultures at inoculation – 1×105 and 1×106 CFU/cm3, respectively) for the production of fermented milk products and cosmetics with probiotics, where the maximum value of the quality aggregated factor – 7, 12 is noted.It is shown that a fermented probiotic milk clots obtained using starter cultures composition with an optimum ratio of cultures of lacto- and bifidobacteria (1 : 10) have good sensory characteristics, contain a high number of viable cells of bifidobacteria and lactobacteria – (9,15±0,14)×109 and (8,50±0,50)×108 CFU/cm3, respectively, and a low level of titratable acidity at a specified value of the active acidity and are safe in terms of microbiological characteristics
- ДокументANALYSIS OF A NEW DIAFILTRATION METHOD OF CLEANING BUTTERMILK FROM LACTOSE WITH MINERAL COMPOSITION PRESERVED(2018) S. Bondar, O. Chabanova, T. Sharakhmatova, A. TrubnikovaRemoving lactose from buttermilk and other dairy products is a topical problem, as there is a significant increase in morbidity rates due to lactose intolerance. In many cases, milk and dairy products containing lactose can not be completely excluded from the diet. These products have a number of valuable components. There are several ways to remove lactose from milk or other dairy products. They are based on separation methods of processing and on the use of enzymes. Among the separation methods, membrane treatment, including diafiltration, is of particular importance. A technique of engineering calculation of cleaning an ultrafiltration buttermilk concentrate is suggested. As a solvent that reduces the concentration of lactose, a nanofiltrate permeate of buttermilk ultrafiltration is used. This method allows preserving the chemical composition of the concentrate with lactose effectively removed. Basing on the experimental data of membrane productivity and their selectivity for lactose, the main characteristics of diafiltration are calculated for various practical applications. For practical purposes, it is advisable to use a buttermilk permeate nanofiltrate using highly selective lactose membranes. Selectivity for salts should be minimal. When comparing the different diafiltration variants, the most suitable is a periodic method, with continuous dilution, and a continuous method with a crossflow and reverse flow of the nanofiltrate. The smallest аmount of a nanofiltrate is observed in the case of a continuous countercurrent. The time for diafiltration treatment depends on the membrane’s specific parameters, process operating parameters, and the selected lactose purification variant. The most cost-effective is the continuous variant with a countercurrent nanofiltrate. However, it can not be recommended because of the considerable duration of the process. The suggested technique for calculating diafiltration allows quick evaluation of possible options of purifying the product from lactose, and concludes which one is optimal.
- «
- 1 (current)
- 2
- 3
- »