Том 15 № 2

Постійне посилання зібрання

https://card-file.ontu.edu.ua/handle/123456789/24886

Переглянути

Зараз показуємо 1 - 15 з 15

ANTIMICROBIAL BIODEGRADABLE PACKAGING FOR SLICED BAKERY
(2021) О. Shulga, A. Chorna, S Shulga
In the modern minds of the advanced ecology and safety of food products control, it is relevant the development of antimicrobial biodegradable packaging. The article presents the results of the antagonistic action of nanodispersed titanium dioxide powder (TiO2) at the warehouse of biodegradable packaging for bakery products on the living of microorganisms (Escherichia сoli, Bacillus subtilis, Candida albicans, Aspergillus niger). It is known there are developments on the use of antimicrobial substances of both organic and inorganic origin, the microbiological action of the substances used have an effect on pathogenic, opportunistic, fungi, gram-negative and gram-positive bacteria. We found that the introduction of 1% TiO2 r into the molding solution allows to give the package antibacterial properties, as it inhibits the development of Escherichia coli and Bacillus subtilis, as there is a delay in the growth of their colonies compared to the sample without packaging with TiO2. According to the results of provocative testing, biodegradable packaging with a content of 1% TiO2 has an inhibitory effect on Bacillus subtilis. In addition to antimicrobial properties, the package under study must also have barrier properties, so the vapor permeability of the presented package was determined. The study results show that the addition of 1% TiO2 slightly reduces the vapor permeability, but the increase in the concentration 2–5% of TiO2 causes an increase in vapor permeability from 4.7 to 5.2 mg / (m∙h∙kPa). The vapor permeability of the presented biodegradable antimicrobial packaging is due to the presence of pores, the number and size of which were determined experimentally. Thus, nanodispersed TiO2 in the amount of 1% in the molding solution of the biodegradable coating is an effective antimicrobial component for antimicrobial coatings, which does not impair their barrier properties.
BIOACTIVATED BUCKWHEAT IN TERMS OF ITS NUTRITIONAL VALUEBIOACTIVATED BUCKWHEAT IN TERMS OF ITS NUTRITIONAL VALUE
(2021) M. Zenkova
Buckwheat is a gluten-free pseudocereal crop consumed as functional food in some regions. Traditionally, buckwheat grain is used to make buckwheat groats and flour. Bioactivation improves the nutritional value of buckwheat grain by activating hydrolytic enzymes that make nutrients available for the plant’s growth and for the human body. The article contains research on the content of nutrients in bioactivated buckwheat grain of the Kupava variety grown in Belarus. The study examined hulled buckwheat kernels (not steamed) of the botanical variety Kupava, cream-coloured with a greenish hue, with the humidity 12.0%, and with the proportion of sound kernels 99.4%. At the first stage of germination, bioactivated buckwheat grain was obtained in 48 hours. It had the following characteristics: humidity (39.2±1.0)%, sprout size (2.0±0.5) mm. According to the organoleptic parameters, the grain had a pleasant sweetish taste and a subtle nutty aftertaste. The components of bioactivated buckwheat grain that provide a person with the largest amounts of macronutrients are starch (31.84±0.6)%, sugars (5.1±0.3)%, and protein (5.67±0.02)%. Bioactivated buckwheat grain contains all essential amino acids (30.5% of the total quantity of amino acids). The limiting amino acid is threonine (amino acid score 31.7%). Of nonessential amino acids, there is a high content of glutamic acid (1.0972 g per 100 g). The difference ratio of the amino acid score is 54.75%, the potential biological value of the protein is 45.25%. 100 g of sprouted buckwheat grain contains 48.5% of the daily requirement of manganese, 24.0% of copper, 18.9% and 34.0% of iron (for women and for men respectively), about 23.0% of the daily requirement of vitamin B1, and 12.7% of the daily requirement of vitamin E. Besides, bioactivated buckwheat grain contains fibre (6.5% of the daily requirement on average). Bioactivated buckwheat grain can be consumed as a meal in its own right, as a side dish, as an additive to salads and fermented dairy products, or as a dessert when mixed with fruit purée, honey, or dried fruit.
COMPOSITION OF BIOACTIVE COMPOUNDS FOR CULTIVATION OF BRASSICA JUNCEA CZERN
(2021) L. Krichkovskaya, P. Lysak, M. Bobro, V. Dubonosov, Yu. Gritzaenko
cultivation of plant food objects, in particular, Brassica juncea czern (mustard seeds of the talisman variety). In addition, the issue of recycling of the most concentrated fermentation liquid, which is a waste after separation at the stage of growing a pure yeast culture, is solved. The growth-stimulating activity of "Humir-1", created on the basis of hydrated fullerenes (HyFn), (C60(H2O)n) and humates, as well "Humir-2" in which the mixture of hydrated fullerenes and humates was added to the supernatant of the fermentation fluid, in which a pure culture of yeast (strain Saccharomyces cerevisiae) was grown. Concentrated aqueous solutions of hydrated C60HyFn which are molecular colloidal systems of spherical fractal clusters, the structural unit of which is a strong, highly hydrophilic supramolecular complex consisting of a C60 fullerene molecule enclosed in the first hydrated shell containing 24 water molecules were used as a basis in “Humir” preparations. Humates, which is also part of the developed composition, in addition to stimulating growth, has a positive effect on the plant's immunity, helping to adapt to the environment and increase protection against its negative manifestations. The supernatant of the fermentation mixture, in which pure culture yeast was grown, is rich of vitamins, micro and macro elements, yeast residues, and also contains the dry matter of yeast rich in biologically active substances. The influence of the developed compositions on the efficiency of brassica juncea czern cultivation was studied in laboratory and field conditions on the basis of an experimental farm of the Dokuchaev Institute of Agriculture in Kharkiv region. As a result of research, it has been proved that the developed drug "Humir-2", in addition to increasing the yield of brassica juncea czern, increases photosynthetic activity, increases germination and germination energy. As a result, plants have a powerful developed root system and a significantly increased assimilation area of the Leaf.
DEVELOPMENT OF COLLAGEN-CONTAINING DRINKS
(2021) Y. Verkhivker, O. Myroshnichenko, S. Pavlenko
The problem of human aging is very relevant today. The mechanisms of aging are closely related to the decrease of such a protein substance as collagen in the human body. One of the possibilities for restoration the amount of this vital component is the use of collagen-containing juice products of everyday use in the diet. Taking into account the relevance and prospects of this issue, the direction of further work has been chosen accordingly. The purpose of the research is the use of collagen in the formulation of an assortment of juice products based on fruit and vegetable raw materials. To achieve the goal of the study we formulated the tasks that allowed us to research the range and quality indicators of different types of collagen of plant and animal origin (tomato, beef, pork and fish) as well as to justify the choice of the most preferred collagen sample for drinks. We have determined the optimal amount of this biologically active additive to ensure the required quality of the finished product. We have investigated the preservation of the active properties of various types of collagen in fruit and vegetable drinks. As a result of the studies performed it has been shown that beef collagen is the most acceptable and retains its active properties in an amount of 5% to the mass of the drink; it adds salt, alcohol, alkaline protein fractions according to its fractional composition. It has been shown that the amino acids methionine, tryptophan and hydroxyproline which confirm the presence of collagen in the product are contained in ready-made juice drinks enriched with collagen of beef origin. The formulations of fruit and vegetable drinks with the addition of collagen have been developed accordingly. A comparison of the organoleptic and physicochemical characteristics of finished drinks with the requirements of normative and technical documentation (DSTU 4283-2007) was carried out and their full compliance was proved.
Effect of selected parameters on sectional expansion index and bulk density during the extrusion of chickpea instant semolina
(2021) T. Angelova, Zh. Goranova, T. Petrova, N. Penov
A four-factor Response surface methodology central composite rotatable design was used to study the effect of moisture content, barrel temperature, screw speed, and feed screw speed on sectional expansion index and bulk density during extrusion of chickpea instant semolina for the purpose of instant product. The regression models for the investigated responses were highly significant (according to P-value) with satisfactory coefficients of determination (R2) 0.894 and 0.957. These results show that the predicted models for the investigated responses are adequate, indicating that the second-order polynomial model could be effectively used to represent the relationship between the selected parameters. The study showed that the expansion was influenced by moisture and temperature and it increased with increasing temperature for moisture content from 20 to 23% and after that decreased. Bulk density decreased with increasing feed moisture and barrel temperature in the extruder. The most important consequences for the science and practice resulting from the conducted research are that the resulting extrudates after grinding can be successfully used for the preparation of instant product with good characteristics, such as bulk density and sectional expansion index.
FORMATION OF THE QUALITY OF UNFORTIFIED WINE MATERIALS OBTAINED FROM BLACK ELDERBERRIES
(2021) A. Tokar, O. Lytovchenko, V. Khareba, L. Matenchuk, O. Pobirchenko
The use of local non-conventional raw materials will allow significantly enriching unfortified fruit wines with ascorbic acid and phenolic substances and make it possible to obtain products with increased biological value. The paper considers black elderberries grown in the forest steppe zone of Ukraine. It has been determined that they contain 12–13% of soluble solids, 6.9–8.1 of sugars, 0.93–1.2% of titratable acids, 33.4–53.1 mg/100 g of ascorbic acid, and 2331–3888 mg/100 g of phenolic substances. The pressing process and its dependence on the method of treating berries have been studied. It has been proved that juice extraction from black elderberries is the highest when they are pretreated with heat at 98±2°C for 3–5 minutes, with 15% of water added. Depending on the treatment method, juices retain ascorbic acid (15.8–33.4 mg/100 g) and phenolic substances (2538–3888 mg/100 g), which indicates their high biological value. Juices like these can be used to improve the biological composition of blended juices and wines. To ferment high-sugar black elderberry must, active dry yeast was used, namely the yeast races EC-1118 of the genus Saccharomyces bayanus (France) and ENSIS LE-1 or ENSIS LE-5 of the genus Saccharomyces cerevisiae (Spain). The musts were fermented for 36–62 days. The period of vigorous fermentation coincides with the period of initial fermentation and ends in 9–10 days, with accumulation of 12–14% of ethanol by volume. Unfortified wine materials obtained from black elderberries contain 22–38.3 mg/100 g of ascorbic acid (its content in wine materials is by 7.8–49.55% lower than in fresh berries) and 1750–3510 mg/100 g of phenolic substances (which is lower by 9.7–39.6%, as compared with fresh elderberries). The active acidity of black elderberry wine materials is 3.90–4.09 pH units, depending on the yeast race. A similar difference has been found for the redox potential (160–176 mV), which indicates that the wine materials from black elderberries are low-oxidised. The intensity of colour of the wine materials obtained from black elderberries (D420 + D520) varied from 3.08 to 3.20, and the colour shade from 0.88 to 0.92, which is typical of young red wines. These wine materials can be used to increase the quality and biological value of blended wines.
INFLUENCE OF THE HYDROTHERMAL TREATMENT TEMPERATURE CONDITIONS ON POULTRY MEAT
(2021) O. Synytsia, L. Vinnikova
The poultry production is growing rapidly every year. Having a rapid pace of development and reproduction, and greater affordability, the poultry products are in high demand from the population. In this regard, the industry is in demand for deep processing of poultry meat, which is not only economically feasible, but also makes it possible to expand the scope of use of this product. The complex morphological structure of the poultry complicates its use as the main raw material for meat products, and poultry meat is mainly sold in the form of natural semi-finished products with a limited shelf life. It is possible to expand the range of poultry products through the production of canned food. A new technology for the production of pasteurized canned poultry meat was developed at the Department of Meat, Fish and Seafood Technology of the Odessa National Academy of Food Technologies. This technology involves hydrothermal treatment of the raw materials, hot boning, mixing of components of the formulation and pasteurization. This article reveals the issue of the first stage of production, namely the establishment of rational meat hydrothermal treatment conditions. The problem of choosing the heat treatment conditions is extremely important, because depending on the process conditions and the final heating temperature, the transformation of the components and the properties of the finished products differ significantly. The paper studies the effect of temperature in the range from 65 to 95°C in 5°C increment on the rate and degree of cooking of collagen, the formation of the required structure of the product (hydrogel base filled with individual muscle fibers), hardness and tenderness of meat. It is established that the optimal processing temperature of poultry meat is 65°C. The meat processed at this temperature had the highest degree of collagen cooking, the highest viscosity of the broth, the lowest shear stress, and the best organoleptic characteristics.
JUSTIFICATION OF THE INNOVATIVE METHOD OF PRELIMINARY PROCESSING OF FISH RAW MATERIALS
(2021) N. Kushnyrenko, A. Palamarchuk, S. Patyukov
The scientific article presents experimental data on the possibility of modification of the generally accepted traditional technology of pre-heat treatment of freshwater fish raw materials in the production of canned fish by developing an innovative method - dehydration with hydrochloric acid. Technological and rheological features of the muscle tissue of the object of study - silver carp, which is the most important object of aquaculture and commercial fish farming in Ukraine and in many other countries, require the use of pre-heat treatment. This technique is required to remove moisture from muscle tissue by denaturing sarcoplasmic proteins when the temperature rises above 95 C. Due to the high specific heat of fish muscle tissue, heat treatment is energy intensive and, consequently, not cost effective. In connection with the above promising direction of modification of preliminary heat treatment of raw materials of the fish industry in the production of canned fish should be the development and implementation of a new innovative energy-saving method of processing semi-finished products in the design of modern fish processing enterprises. The paper presents data on the effect of hydrochloric acid on the properties of muscle tissue of silver carp. This directional regulation of the moisture holding capacity in the direction of its reduction is possible by shifting the pH to the isoelectric point of muscle tissue proteins. The influence of such technological parameters as mass fraction of hydrochloric acid in the treatment solution, hydromodule (solution: raw material), temperature and duration of the process on the change of active acidity of muscle tissue of fish raw materials, and, accordingly, moisture binding capacity was established. Accordingly, the following technological parameters of the process were determined: mass fraction of hydrochloric acid - 0.1%, processing temperature 20–25°С, hydraulic module - 1:10, processing duration - 30 minutes. The introduction of the developed technological parameters of the innovative method of pre-treatment creates conditions in which the active acidity of muscle tissue is as close as possible to the isoelectric point of most fish proteins, which in turn provides minimum values of moisture binding capacity. Based on the obtained data, a technological method of pre-processing of fish raw materials in the production of canned fish has been developed, the use of which allows to completely eliminate energy-intensive thermal operation from the technological cycle, and accordingly significantly increase economic efficiency
MILK LIPIDS AND SUBCLINICAL MASTITIS
(2021) V. Danchuk, V. Ushkalov, S. Midyk, L. Vigovska, O. Danchuk, V. Korniyenko
This article deals with the process of obtaining quality raw milk by analyzing its lipid composition. The lipid composition of raw milk depends on many factors, among which, first of all, is the species, the composition of the diet and the physiological state of the breast. In recent years, a large amount of data has accumulated on the fluctuations of certain lipid parameters of milk depending on the type, age, lactation, diet, time of year, exercise, animal husbandry technology, physiological state of the lactating organism in general and breast status in particular. Factors of regulation of fatty acid composition of raw milk: genetically determined parameters of quality and safety; fatty acid composition of the diet; synthesis of fatty acids by microorganisms of the digestive tract; synthesis of fatty acids in the breast; physiological state of the breast. The milk of each species of productive animals has its own specific lipid profile and is used in the formulation of certain dairy products to obtain the planned technological and nutritional parameters. Diagnosis of productive animals for subclinical mastitis involves the use of auxiliary (thermometry, thermography, electrical conductivity) and laboratory research methods: counting the number of somatic cells; use of specialized tests; microbiological studies of milk; biochemical studies of milk. The biochemical component in the diagnosis of subclinical forms of mastitis is underestimated. An increase in body temperature implies an increase in the intensity of heat release during the oxidation of substrates, sometimes due to a decrease in the intensity of synthesis of energy-intensive compounds. There are simply no other sources of energy in the body. The situation is the same with certain parts of the metabolism, which are aimed at the development of protective reactions to the etiological factor aimed at the defeat of the breast. That is why the biochemical composition of breast secretions in the absence of clinical signs of mastitis undergoes biochemical changes and the task of scientists is to develop mechanisms for clear tracking of such changes, identification of animals with subclinical forms of mastitis and effective treatment.
POLYAMIDAMINEPICHLOROHYDRIN APPLICATION FOR ECO-SAFE WATERFAST AND WATERPROOF FOOD PACKAGING PAPER PRODUCTION
(2021) V. Osyka, N. Merezhko, L. Koptjukh, V. Komakha, S. Kniaz
The paper presents the research results on the properties of the pulp coniferous and deciduous wood composition in its original state and paper made from it, proposes a mechanism to increase the waterfast and waterproof food packaging paper by surface treatment with a composition based on polyamidepichlorohydrin with polyvinyl alcohol and urea. The study was conducted in order to ensure an increase in the consumer properties of packaging paper, since when packaging materials encounter food products, their structure can change under the influence of moisture, steam, and gas. Polyamidaminepichlorohydrin was used as the main component of the composition for paper processing, as functional additives: polyvinyl alcohol and urea. The above-mentioned starting materials are environmentally friendly, since foreign inclusions in food packaging materials would pose a serious danger to human health and life, as well as to the brand image of the product in which they would be detected. It was proved that high waterfastness and waterproofness, as well as the necessary level of barrier, protective and operational properties of packaging material for food products cannot always be obtained by introducing a significant amount of polyamidaminepichlorohydrin, so the paper investigated the mechanism of interacting cellulose fibers of paper with polyamidaminepichlorohydrin, and also proved the possibility of its use to obtain packaging paper with a given set of properties. It was found that the consumption of up to 4–6% polyamidaminepichlorohydrin provides the main increase in the mechanical strength of packaging paper, both in wet and dry conditions. The resulting waterfast and waterproof material can be used for food packaging.
QUALITY OF HELIANTHUS ANNUUS HONEY OBTAINED IN THE CONDITIONS OF RADIOACTIVE CONTAMINATION
(2021) M. Kryvyi, О. Yushchenko, О. Dikhtiar, D. Lisohurska, V. Stepanenko
Natural honey is a source of vital amino acids, easily digestible carbohydrates, macro, microelements, biologically active substances that determine nutritional, antibacterial and antioxidant properties. In the conditions of man-caused pollution of Polissya of Ukraine due to the accident at the Chernobyl nuclear power plant, systematic control of the quality and safety of beekeeping products is important. To conduct such research, we created a group of twelve bee families - analogs of the Ukrainian breed, medium strength. Families were kept in unified multifunctional hives. At the beginning of the honey harvest, the bee families were transported to the sunflower fields, where they stayed during the blossoming of the plants. The density of radioactive contamination of 137Cs soils where sunflower was grown was 47.0 kBq / m2. We used organoleptic, physicochemical, microscopic, microbiological, and radiological methods in the study. According to standard methods, we studied the species composition of pollen grains, physicochemical parameters of centrifugal, honeycomb, and «zabrus» sunflower honey.(zabrus honey was obtained from wax caps, which we cut with an apiary knife from honeycombs filled with nectar and sealed by bees). The content of lead (Pb) in honey from sunflower obtained in the conditions of Polissya is 1.8 - 2.1 times higher than the State sanitary norms. The largest amount of it is in the centrifugal honey. In acceptable amounts, the heavy metals cadmium (Cd), arsenic (As), and 137Cs were present in honey. Pesticides, dichlorodiphenyltrichloromethylmethane, and hexachlorane were not detected in the samples. We investigated the bactericidal action against bacterial growth of typical cultures of Proteus vulgaris, Escherichia coli, Klebsiella pneumonia, Salmonella Typhimurium, and Staphylococcus aureus. Zubrus sunflower honey showed the highest antimicrobial and antioxidant properties. We found that the value of antioxidant activity (AOA) of sunflower honey depends on the method of its production, duration of storage, and solutions of extracts (alcohol, aqueous) used in research. Laboratory control of transgenic organisms in flowers and sunflower pollen did not reveal the target sequences of the cauliflower mosaic virus (CaMV) 35S promoter and the NOS terminator (nopaline synthase) of the plasmid Agrobacterium tumefaciens.
REGULATION OF STRUCTURAL AND MECHANICAL PROPERTIES OF SHIITAKE MUSHROOM SUSPENSION AS AN OBJECT OF DRYING
(2021) T. Turchyna, E. Zhukotskyi, L. Avdieieva, H. Dekusha
The article considers whether a shiitake basidiomycete can be processed into powder. This mushroom is a source of valuable nutrients: it contains, on a dry basis, 18.76% of protein, 74.5% of carbohydrates, 1% of lipids, and 5.73% of ash. It has been determined that to obtain a uniform mushroom suspension, it is advisable to use the mechanisms of discrete-pulse energy input, which is an effective tool to influence the high-strength structural elements of heterogeneous systems of different nature. It has been determined that the mechanostructural properties of a mushroom suspension as an object of spray drying need to be changed. Studies of the microstructure have shown that in a suspension obtained from a whole fruiting body, particles of the insoluble fractions of a shiitake mushroom aggregate into chaotic clusters. These are spatial associates up to 3–4 mm in size, with individual hyphae of their caps or their fragments that are significantly shorter (10–15 μm) than the hyphae of the stems (50–5000 µm). The three-cycle processing of the suspension obtained from a whole mushroom by discrete-pulse energy input led to a decrease in the average particle size by 2.3 times. The same processing of the mushroom suspension obtained from the shiitake caps made it possible to reduce the average particle size by 20 times (to δmax≤100–150 μm). Microstructural analysis of the powder obtained from the whole fruiting body of the mushroom has shown that while the size of the particles generally ranges 4–120 µm, the bulk of them (80–85%) are quite large agglomerates, 40–120 µm in size. The powder obtained from the caps of the mushroom had smaller particles (ranging 4–60 µm), mostly round-shaped, and 75–80% of these particles were 4–20 µm in size. This improved its drying conditions and increased the yield from the spray dryer up to 92% (while the yield of powder prepared from the whole shiitake mushroom was less than 50%). The complex of studies carried out has shown the advantages of obtaining a mushroom suspension from the caps of shiitake mushrooms. The use of mechanisms of discrete-pulse energy input allows a 6-fold increase in the bioavailable health-improving polysaccharide complex contained in the powder from shiitake caps, as compared with the powder obtained from mushroom’s whole fresh fruiting body.
THE CURRENT STATE AND TRENDS OF PROCESSING SECONDARY RAW MATERIALS OF WINEMAKING IN UKRAINE
(2021) L. Osipova, A. Khodakov, O. Radionova, L. Tkachenko, T. Abramova
The current state of processing secondary raw materials of winemaking in Ukraine has been analysed. It has been shown that these materials are a rich source of bioactive compounds. This allows using them to manufacture a wide range of products (oenological tannin, food oenocolourant, polyphenolic extracts, tartaric acid, beverages, grape oil, vitamin D, protein, animal feed, food powder, fertilisers, abrasive materials, etc.) with high consumer value for various industries: food, pharmaceutical, perfume and cosmetics, chemical, compound feed, etc. In the light of modern views, phenolic compounds contained in large quantities in grape stems and pomace have been shown to be indispensable factors in nutrition and treatment. It has been noted that in today’s Ukraine, there are no specialised enterprises for complex processing of secondary raw materials of winemaking. In particular, unprocessed grape stalks and pomace are in most cases uncontrollably carried away to farmlands. This leads to acid erosion of the soil and to polluting the environment by micromycete metabolites, which but exacerbates one of mankind’s global problems, the environmental one. It has been concluded that traditional domestic technologies of processing secondary raw materials of winemaking are technologically, economically, and environmentally ineffective. There is no comparative analysis of innovative domestic and foreign technologies and equipment for processing secondary raw materials of winemaking. Modern innovations to obtain bioactive additives and other products cannot be introduced, since there is no necessary home-manufactured equipment, and imported machines are too expensive. Besides, there is but weak interaction among wineries, research institutions, business structures, and administrative authority. Cluster ideology has been suggested as a basis to organise comprehensive processing of secondary raw materials of winemaking in Ukraine. This will unite the interests of wineries (producers of secondary raw materials), processing enterprises (manufacturers of products from secondary raw materials), research institutions, and potential consumers of innovative products
THE POTENTIAL OF URONIDE HYDROCOLLOIDS FOR THE FORMATION OF SENSORY CHARACTERISTICS OF HEALTH PRODUCTS FROM HYDROBIONTS
(2021) T. Manoli, T. Nikitchina, A. Menchinska, Zh. Cui, Ya. Barysheva
The article presents the theoretical basis and practical aspects of the using of binary compositions of uronid polysaccharides in the technology of culinary products from aquatic organisms in jelly fillings. The relevance of the composition of natural high molecular weight polysaccharides, such as sodium alginate and low-esterified pectin, to promote the improvement of sensory characteristics of culinary products from aquatic organisms in the menu of fish restaurants is shown. The objectives of the study were to obtain a jelly filling of viscous consistency, followed by the formation of a stable, elastic gel for using in the technology of aquatic products. Obtaining a jelly filling involves det-ermining the parameters of the preliminary preparation of hydrocolloids; study of the influence of technological par-ameters on the sensory characteristics of the gel. Creating a dry mixture of sodium alginate and low-esterified pectin with salt and sugar was necessary to ensure the dispersion of particles of dry hydrocolloid powders to prevent sticking when swelling in water at a temperature of 18-20 ° C for 15 minutes. Intense swelling of the mixture occurs in the first 10 minutes of hydration.The degree of swelling reaches 5.8%; further increase in time has almost no effect on the swe-lling process. The swelling kinetics of the hydrocolloid mixture was evaluated by determining the tangent of the angle of inclination tangent to the curve describing the degree of swelling. The rational mass fraction of calcium ions for the formation of a transparent gel of stable, homogeneous, elastic consistency, which is 0.3-0.4% of the 10% solution of calcium chloride, was experimentally established. It was studied that dispersions with a mass fraction of a mixture of alginate: low-esterified pectin substances - 1.8% have a viscous consistency with a dynamic viscosity of less than 0.94 Pa • s, which is important for the implementation of technological operations of transportation and packaging of jelly fillings. The conditions and speed of gelation, which provide the finished culinary products with high sensory cha-racteristics and elastic consistency due to the regulated melting temperature, which is provided by the composition of uronide hydrocolloids, have been studied. It was found that the strength of the gel more than 140 g forms a mixture of hydrocolloids with a mass fraction of from 1.6 to 1.8%.
USING RAW POTATO PEEL IN THE PRODUCTION OF EXTRUDED FEED ADDITIVE
(2021) O. Tsiundyk, B. Iegorov, A. Lapinska, L. Fihurska
The paper is concerned with some aspects of processing raw potato peelings. It presents the dynamics of potato production in the world and in Ukraine, and analyses the figures on yields of this crop. Methods of processing potatoes at Ukrainian enterprises have been considered. It has been found that the bulk of the waste (15–60%) is formed during peeling raw potatoes. Methods of utilisation of potato peelings have been analysed. Problems of using fresh potato peel in the diet of farm livestock have been analysed. The technological operations of potato waste processing have been considered, and it has been substantiated how practical the method of extrusion is. The advantages of manufacturing an extruded feed additive with the use of potato peel have been shown. The physical properties, chemical composition, and term of storage of fresh potato peel have been determined. It has been found that fresh potato peel is poorly storable and hardly flowable, so it must be processed within 48 hours. To produce an extruded feed additive including crushed wheat grain and fresh potato peel in the ratio 9:1, a step-by-step scheme has been developed. The physical properties, the content of individual nutrients and minerals, and the shelf life of the extruded additive have been determined. It has been established that manufacturing the feed additive by the method suggested allows increasing the product’s nutritional value, prolonging its shelf life, improving its sanitary quality, technological properties, and conditions of feeding potato peel to livestock. It has been found that when the amount of potato peel introduced is 10% and that of crushed wheat grain is 90%, the optimal moisture content is 16.5%. Besides, this ratio results in the minimum energy consumption and in a coefficient of expansion high enough. During extrusion, the physical properties change: the moisture content, angle of repose, and bulk density decrease, while the flowability increases, which makes the feed additive suitable for use in the feed products technology. Besides, extrusion of the feed additive is accompanied by reduction in crude protein, crude fibre, and crude fat. It has been established that the shelf life of the additive is 4 months

Переглянути

Перегляд Том 15 № 2 за Назва

Результатів на сторінці

Налаштування сортування